





                                SSHHEEZZ RREEVVIISSIIOONN HHIISSTTOORRYY

v6.1   4/8/91 When a path  option is selected using the P command it will remain
       in effect until it is reset by issuing the P command again.
       When popping  up a  directory window,  the home, end,  pg-up/dn keys  now
       function.  You can also type in a new drive letter C-Z to get a directory
       listing of a different drive.
       The directory window will now support 200 directories instead of 100.
       SHEZ will now create it's swapping file on the user specified Disk:\DIR
       Corrected ARJ  processing. When creating/updating an  ARJ file, directory
       info is not saved unless specifically asked for by the use.
       Support for ARJ release 1.10.
       Make saving/restoring the original DOS screen a user configurable item.
       Modified speed search, when DOS file list is displayed.  Entering a lower
       case a-z  or 0-9 will search for a matching  file, entering an upper case
       A-Z or 0-9 will search for a matching directory name.
       When converting groups of tagged files SHEZ will now show  the total file
       size difference.
       When moving files (individual or  tagged), if the source and  destination
       disk drives are the same SHEZ will now move the file  pointers instead of
       performing a copy and delete.
       When changing directories or entering  an extract path, pressing F9  will
       now show a graphical tree of dirs.
       Added a config option to force SHEZ to swap to disk even if EMS memory is
       available.
       The 6.1 version is not crippled in any way to abide by the ASP bylaws.  A
       shareware opening screen was added at startup time per the ASP bylaws.
       The full serial number is now displayed on the opening screen.

v6.0c  3/12/90 Added full support for LHA205, LHA210,  and LHA211, including all
       header levels.
       When creating SFX file from LZH files  the directory info in the LZH file
       will be retained in the SFX file.
       User can  now configure  SHEZ to  use it's  memory swapping  feature when
       executing compression programs.  When  this feature is activated the  DOS
       window will be temporarily disabled.
       When the DOS directory  window is displayed  the size of the  highlighted
       file is now show at the bottom of the directory window.
       When using the  CTL-Y command to copy member of  one compressed file into
       another compressed  file, the user now  has the option of  creating a new
       compressed file if the target file does not exist.

v6.0b  2/24/90 Misc. bug fixes.


                                      Page 1












                                SSHHEEZZ RREEVVIISSIIOONN HHIISSTTOORRYY

v6.0   2/22/90 The  CFG program will  now allow you  to optionally  use extended
       background colors
       When  editing a file SHEZ  will now only save the  editted file back into
       the compressed file if the file has been modified.
       The CFG program will no longer reset the serial number when reconfiguring
       SHEZ.
       The  CFG  program  will  now  also  allow  you  to  update   an  external
       configuration file if one is found.
       The default  extract path can now  be set and saved  in the configuration
       information.
       The CFG  program will now  allow you  to set the  function key  highlight
       colors.
       Most single letter prompts no longer  require the user to press the enter
       key.
       When the main DOS file list is sorted, directories will  always appear at
       the top of the list.
       When  using the  speed search  option on  the DOS  file list,  pressing a
       letter  or a number will position you first  to a directory name, then if
       the same letter  or number is pressed again you will be positioned to the
       first matching file.
       When entering a filespec without directory information, SHEZ will default
       to the current default directory for the specified or default drive.
       The file times is now displayed in the DOS directory  window, and is used
       when sorting the list by date.
       Support was added for LZH compression method 2.05.
       Support was  added to convert an LZH file from the old compression method
       to  the new  compression  method by  simply converting  the  LZH file  to
       itself.
       (NOTE: LEVEL 2 HEADERS  FOR LHA 2.05 IS NOT SUPPORTED IN  THIS VERSION OF
       SHEZ)
       Support was added for the ARJ compression method.

v5.9   11/9/90  When  extracting from  a  ZIP file  that has  been  created with
       authenticity  mode SHEZ will  pause allowing you  to see the authenticity
       message.
       When tagging files  on the main  screen then pressing  ALT-Z to scan  for
       viruses,  the  tag  count is  incorrect--fixed.  Added  command  CTL-X to
       immediately exit SHEZ and goto the extract path.
       SHEZ is now DESQview aware.
       SHEZ will now operate on files that are contained in Hidden directories.
       When renaming  individual  files the  TO:  prompt  will now  contain  the
       orginial filename, including disk and directory, to be renamed.

                                                                     Page 2












                                SSHHEEZZ RREEVVIISSIIOONN HHIISSTTOORRYY

       Sorting  the main  file list  by name  will now  also sort  the directory
       names. In addition  when the file list is sorted by  name you can use the
       speed search facility to position the highlight bar to a directory.
       When invoking an editor from the main  file list the screen was not being
       restored correctly--fixed.
       When  running  PKZIP  in  authentic  mode  SHEZ  will  exclude  the  file
       AVEXTRA.TXT.

v5.8   10/02/90 Pressing the ESC key will eventually exit SHEZ. The authenticity
       warning message now appears in the same color as the help screen.
       The ALT-E  command was added on the main file window to invoke the editor
       on the highlighted file.
       The  Plus + and  Minus -  keys can be  used to  tag and untag  files. The
       environment variable  SHEZCFG can now be  used to tell SHEZ  to read it's
       configuration information from a configuration file.
       When  tagged files that  where contained in  a secondary compressed file,
       the  tags remained when  reverting back to  the orginial compressed file.
       (This bug has been fixed) Support for PAK release 2.5 has been added.

v5.7   07/25/90 Allow ALT-1 to function when the file list window is displayed.
       Fixed a problem with the copy file function.
       Fixed  the configuration  program  allowing users  to install  the serial
       number.
       Corrected a  bug when  attempting to look  at compressed  files that  are
       contained within compressed files.

v5.6   06/27/90 Date  format is  now displayed  in correct  format based  on the
       country code from DOS.
       ALT-1 toggles the authenticity option in PKZIP.
       Virus scan now uses the /nomem switch to bypass the memory scan feature.
       The cursor  is now  restored before  going to DOS  or the  Editor. CTRL-Y
       option added to copy members from one compressed file to another.


v5.50  5/15/90 Added tagged file display.
       Added ALT-S command to display file sizes in directory window. Added ALT-
       D command to  display file  dates in directory  window. Added ability  to
       sort displays  by file size. Copy  and Move files now  preserves orginial
       file time and date. Added ALT-N command to extract only  newer files. The
       shift key  now  displays tagged  count  when  compressed file  window  is
       displayed.
       When specifing an extract path or switching to a new directory F9 can not

                                                                     Page 3












                                SSHHEEZZ RREEVVIISSIIOONN HHIISSTTOORRYY

       be pressed to present a list of directories in a scrollable window.
       CTRL-ENTER can now be pressed to active an alternate file viewer,  either
       "generic" or file extension specific.

v5.40  3/27/90  Corrected problem restoring  cursor when running  under some EGA
       boards.
       Implemented a serial number in SHEZ.
       Added support  for version 1.1 of PKZIP, including the option to only use
       the  Imploding  method  of  file  compression,  and  creating  Mini  Self
       Extracting Files.
       Self extracting ZIP files may now be converted back to normal .ZIP files.
       ZOO files may now be imbeded into other compressed files.
       Command line arguments may now be passed to the editor that you tell SHEZ
       to invoke.

v5.31  02/08/90 Fixed  bug when trying  to copy/move  a highlighted file  in the
       file directory window.
       The  ALT-D (delete all) command will now  only delete files if their time
       and date are equal  to or less then the time and date  of the file in the
       compressed file.

v5.3   02/05/90  Fixed bug when  extracting tagged files  from a compressed file
       that contains directory information.
       When creating  a new compressed file  in TAG mode any key  other then the
       ENTER key  when the filelist window  is displayed will  cancel the create
       process.
       Expanded the MOUSE menu and made them context sensitive.
       Pressing the left  mouse button  will provide a  Y response to  a Y or  N
       prompt, the rigth  button will provide  a N response.When the  "Press any
       key" prompt appears either the left or right mouse button may be pressed.
       Corrected the Mouse routines to allow a logitec mouse to work.
       Copy and Move tagged will  only ask for the destination DISK:\DIR  on the
       first file of the group.
       Created a  DOS window to  display the output  of the  compression program
       being run and the virus scan program.
       Added a  new environment variable SHEZCMT to allow a default comment file
       when adding/updating compressed file comment records.
       Increased the number of unique directory  name the large data version can
       handle, from 20 to 40.

v5.2   01/05/90 When specifying an extract  directory, via ALT-P, that does  not
       exist, pressing F10 will create the directory.

                Page 4












                                SSHHEEZZ RREEVVIISSIIOONN HHIISSTTOORRYY

       Fixed the file TAG logic when creating new compressed files.
       Corrected small bug in mouse routines that caused some PC's to lock up.

v5.11  2/5/89 Made more modifications to the mouse routines.
       Fixed a bug when converting from one compressed file format to another.
       Fixed the extraction routines when working with ZOO files. (Files with no
       extension were not being extracted or converted)
       Made  modifications to startup routines.   When SHEZ  starts and does not
       find subdirectories  or compressed  files  in the  default, or  specified
       directory, an option  window will open allowing a new  compressed file to
       be created, allow  you to look into  another DISK:\DIRECTORY, or to  EXIT
       SHEZ.

v5.0   11/25/89 Corrected small bug in scrolling routines.
       Added F8  and  SFT-F8 commands,  Convert highlighted  file  to SFX  file,
       Convert tagged files to SFX files. (ZIP,LZH,PAK files only).
       New Distribution and Support BBS. 
       Directory Assistance (707) 538-8710
       Help screen will now take advantage  of additional lines when using 43 or
       50 line modes.
